Drag Block Tubing Anchor/Catcher

The Drag Block Tubing Anchor/Catcher (DB Anchor) is a retrievable positive-action tubing anchor designed to hold the tubing string in tension or compression. It has drag blocks to allow the anchor to be run deeper than conventional drag spring anchors. The anchor prevents movement of the tubing during pumping strokes; and holds it stationary if it should part. The use of a tension tubing anchor increases pump efficiency, reduces rod and tubing wear, and keeps tubing and rods from falling into the well in case of a part.


Register/Login to see standard tools

Technical Data for Variations of the Standard Tools Below


Product Information

Special Features

Enclosed slips
Rotational release or shear release
Safety release value easily adjusted

Related Products

Product Specifications

Casing Recommended Hole Size (inches) Gage OD
(inches)
Max OD (inches) Tool ID (inches) Thread Connections Box Up / Pin Down Part Number Technical Data
Size (inches) Weight (lbs/ft)
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 - 1.94 2-3/8 EUE 32545 Register/Login to see technical data
5-1/2 13.0 - 20.0 4.778 - 5.044 4.500 4.6401 2.00 2-3/8 EUE 32555 Register/Login to see technical data
2.44 2-7/8 EUE 32556 Register/Login to see technical data
7 17.0 - 32.0 6.094 - 6.538 5.750 5.8541 2.50 2-7/8 EUE 32570 Register/Login to see technical data
3.00 3-1/2 EUE 32573 Register/Login to see technical data
7-5/8 24.0 - 39.0 6.625 - 7.025 6.400 6.4041 2.50 2-7/8 EUE 32575
8-5/8 24.0 - 40.0 7.725 - 8.097 7.500 7.6871 4.00 4-1/2 EUE 32585
9-5/8 32.3 - 53.5 8.535 - 9.001 8.250 - 3.00 3-1/2 EUE 32595-XBAE Register/Login to see technical data
4.00 4-1/2 EUE 32595 Register/Login to see technical data

1 Maximum OD is across retracted drag blocks.

NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.


Drag Block Tubing Anchor/Catcher