AS-5 Packer

The AS-5 Packer is a compression set tool with a J-slot to control pack-off. It is run above other packers - such as the AS-III Packer - to selectively treat, produce or inject in multiple zone completions. It is also used to isolate casing hole perforations. This packer features a large by-pass area to prevent swabbing when running and retrieving. When releasing, the valve allows debris to be washed from the upper slips.

 


Product Information

Special Features

Large internal by-pass
Mechanical slips vs. hydraulic buttons
Additional J-slot arrangements available

Related Products

Product Specifications

Casing Recommended Hole Size (inches) Tool OD (inches) Tool ID (inches) Thread Connections Box Up / Pin Down Part Number Technical Data
Size (inches) Weight (lbs/ft)
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 60845 Register/Login to see technical data
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 2.00 2-3/8 EUE 60855
2.38 2-7/8 EUE 60856 Register/Login to see technical data
20.0 - 23.0 4.670 - 4.778 4.500 2.00 2-3/8 EUE 60857
2.38 2-7/8 EUE 60859 Register/Login to see technical data
7 17.0 - 26.0 6.276 - 6.538 6.000 2.50 2-7/8 EUE 60872
3.00 3-1/2 EUE 60874
26.0 - 32.0 6.094 - 6.276 5.875 2.50 2-7/8 EUE 60870

NOTE: All pricing includes standard Nitrile trim. Carbide, other sizes, connections, and J-slot configurations are available upon request.


AS-5 Packer