Mechanical Set Packers

AS-II Packer

The AS-II Packer is a large-opening, compression-set packer with mechanical slip hold-downs. This packer withstands high pressure from above or below by using a 3-element packing system, and upper and lower mechanical slips. A J-slot and a drag block mechanism are incorporated for easy setting. This packer has a built-in unloader which circulates across the mechanical hold-down slips to improve retrievability. The unloader has a pressure compensating piston to keep it closed when pressure is greater below the set packer.

The AS-II Packer is available in the standard J-slot arrangement – right-hand auto set with straight pick-up release. Other J-slot arrangements are available: right-hand manual set, left-hand auto set, and left-hand manual set. All J-slot arrangements are straight pick-up release.

Special Features

  • Large internal by-pass
  • Mechanical slips vs. hydraulic buttons
  • Differential pressure holds valve closed
  • Additional J-slot arrangements available
AS-II Packer

Product Specifications

Size (inches) Weight (lbs/ft) Recommended Hole Size (inches) Gage OD
(inches)
Max OD (inches) Min ID (inches) Thread Connections (Box Up / Pin Down) Part Number Technical Data
2-7/8 6.4 - 6.5 2.375 - 2.441 2.250 2.2631 0.62 1.050 EUE 61125  
3-1/2 7.7 - 10.2 2.922 - 3.068 2.781 - 1.25 1.900 NUE 61135 PDF
3-1/2 7.7 - 10.2 2.922 - 3.068 2.938 - 1.25 1.900 NUE 61136  
4 9.5 - 11.0 3.476 - 3.548 3.250 3.3121 1.50 1.900 EUE 61140 PDF
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 - 1.94 2-3/8 EUE 61145RS PDF
4-1/2 15.1 3.826 3.656 - 1.94 2-3/8 EUE 61144RS PDF
5 11.5 - 18.0 4.276 - 4.560 4.125 4.2201 1.94 2-3/8 EUE 61150 PDF
5 18.0 - 21.4 4.126 - 4.276 4.000 - 1.94 2-3/8 EUE 61152 PDF
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 - 2.00 2-3/8 EUE 61155  
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 - 2.38 2-7/8 EUE 61156 PDF
5-1/2 20.0 - 23.0 4.670 - 4.778 4.500 - 2.00 2-3/8 EUE 61157  
5-1/2 20.0 - 23.0 4.670 - 4.778 4.500 - 2.38 2-7/8 EUE 61159  
5-3/4 17.6 - 19.4 4.958 - 5.021 4.875 - 2.38 2-7/8 EUE 61158Y  
6-5/8 17.0 - 24.0 5.921 - 6.135 5.750 - 2.50 2-7/8 EUE 61167 PDF
6-5/8 24.0 - 32.0 5.675 - 5.921 5.500 - 2.50 2-7/8 EUE 61165 PDF
7 17.0 - 26.0 6.276 - 6.538 6.000 6.0621 2.50 2-7/8 EUE 61172 PDF
7 26.0 - 32.0 6.094 - 6.276 5.875 - 2.50 2-7/8 EUE 61170 PDF
7 26.0 - 32.0 6.094 - 6.276 5.875 5.9361 3.00 3-1/2 EUE 61173RS PDF
7 29.0 - 35.0 6.004 - 6.184 5.812 - 2.50 2-7/8 EUE 61171  
7-5/8 33.7 - 39.0 6.625 - 6.765 6.453 - 3.00 3-1/2 EUE 61177  
9-5/8 32.3 - 43.5 8.755 - 9.001 8.500 - 3.00 3-1/2 EUE 61198 PDF
9-5/8 32.3 - 43.5 8.755 - 9.001 8.500 - 4.00 4-1/2 EUE 61196  
9-5/8 43.5 - 53.5 8.535 - 8.755 8.250 - 3.00 3-1/2 EUE 61197 PDF
9-5/8 43.5 - 53.5 8.535 - 8.755 8.250 - 4.00 4-1/2 EUE 61195  
13-3/8 54.5 - 77.0 12.275 - 12.615 12.000 - 4.00 4-1/2 EUE 61113 PDF

1 Maximum OD is across retracted drag blocks.

NOTE: All pricing includes standard Nitrile trim. Carbide, other sizes and connections are available upon request.

OPTIONS: RS (Right-Hand Auto Set), RM (Right-Hand Manual Set), LS (Left-Hand Auto Set), LM (Left-Hand Manual Set)

Packing quality and service
into everything we do