Snapset I Packer

The Snapset I Packer is a compression set packer requiring only straight set down weight to pack-off. This packer is run above other packers (such as the ASI-X Packer, AS-II Packer or AS-III Packer) for selective production to isolate casing holes and perforations.
 
This packer has no upper or lower slips and should be used only where intermediate differential pressures from below are expected. This packer has an internal latch to prevent the packer from setting prematurely when running down the hole. When releasing, the latch re-engages to allow movement downhole and re-setting.


Product Information

Special Features

Large internal by-pass
Set down to pack off, pick up to release
Compact design

Related Products

Product Specifications

Casing Recommended Hole Size (inches) Tool OD (inches) Tool ID (inches) Thread Connections Box Up / Pin Down Part Number Technical Data
Size (inches) Weight (lbs/ft)
3-1/2 7.7 - 10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 63535
4-1/2 9.5 - 13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 63545 Register/Login to see technical data
5-1/2 14.0 - 20.0 4.778 - 5.012 4.625 2.00 2-3/8 EUE 63555 Register/Login to see technical data
2.38 2-7/8 EUE 63556 Register/Login to see technical data
20.0 - 23.0 4.670 - 4.778 4.500 2.00 2-3/8 EUE 63557
2.38 2-7/8 EUE 63558
7 17.0 - 26.0 6.276 - 6.538 6.000 2.50 2-7/8 EUE 63572
26.0 - 32.0 6.094 - 6.276 5.875 2.50 2-7/8 EUE 63570
7-5/8 24.0 - 29.7 6.875 - 7.025 6.672 2.50 2-7/8 EUE 63575
9-5/8 43.5 - 53.5 8.535 - 8.755 8.250 3.00 3-1/2 EUE 63595-BAE

NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.


Snapset I Packer