CR Bridge Plug

The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at elevated temperatures and pressures. This plug permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction material.

The short, compact, interlocked construction assures the user that the CR Bridge Plug will provide faster, safer run-in, dependable set and pack-off and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out. The outside diameter of these products has been held to a minimum to provide maximum tool-to-casing clearance for safe running and maximum fluid by-pass area during displacement procedures even in heavy mud systems.

A Wireline Adapter Kit (WLAK) and Hydraulic Setting Tool are used for setting CR Bridge Plugs. 

NOTE: The CR Bridge Plug is designed to provide a temporary wellbore seal. For a permanent wellbore seal, cement must be set on top of the plug.


Register/Login to see standard tools

Technical Data for Variations of the Standard Tools Below

Product Information

Special Features

Convertible to Cement Retainer
Sets on wireline or on tubing with mechanical setting tool

Related Products

Product Specifications

Casing Recommended Hole Size (inches) Tool OD (inches) Part Number Technical Data
Size (inches) Weight (lbs/ft) Mechanical Set Wireline Set Mechanical Set Wireline Set
4-1/2 9.5 - 15.1 3.826 - 4.090 3.612 84245MS 84245WS Register/Login to see technical data
5 11.5 - 18.0 4.276 - 4.560 3.937 84250MS 84250WS
5-1/2 14.0 - 23.0 4.670 - 5.012 4.315 84255MS 84255WS Register/Login to see technical data
Register/Login to see technical data
6-5/8 17.0 - 32.0 5.675 - 6.135 5.375 84265MS 84265WS
7 17.0 - 35.0 6.004 - 6.538 5.680 84270MS 84270WS Register/Login to see technical data
Register/Login to see technical data
7-5/8 20.0 - 39.0 6.625 - 7.125 6.313 84275MS 84275WS
8-5/8 24.0 - 52.0 7.435 - 8.097 7.125 84285MS 84285WS
9-5/8 29.3 - 58.4 8.435 - 9.063 8.125 84295MS 84295WS Register/Login to see technical data
Register/Login to see technical data
10-3/4 32.75 - 60.7 9.660 - 10.192 9.437 84210MS 84210WS
11-3/4 38.0 - 60.0 10.772 - 11.150 10.437 84211MS 84211WS
13-3/8 48.0 - 72.0 12.347 - 12.715 12.000 84213MS 84213WS

OPTIONS: MS (Mechanical Set), WS (Wireline Set)

NOTE 1: Conversion Kits are available for converting either way.

NOTE 2: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.


CR Bridge Plug